Banner
Home  //  Water Pumps Submersible Drainage  //  ZX VORTEX
ZX VORTEX
Print
E-mail

ZX
Download ZX pdfBuy Pedrollo Water Pump


DOWNLOAD PDF FOR FULL DETAILS INC PERFORMANCE CURVES AND DIMENSIONS

PLEASE NOTE NOT SUITABLE FOR PONDS. TO SEE OUR RANGE OF MESSNER POND PUMPS PLEASE CLICK HERE

 

Flow rate up to 300 L/min (18 m³/hr)
Dynamic head up to 10 m

OPERATING LIMITS

Maximum operating depth 5m below water level
Fluid temperature up to + 40 °C
Maximum passage for suspended solids Ø 40mm
Maximum emptying level 40mm from the bottom
For continuous duty: minimum immersion 240mm from pump base

PUMP INSTALLATION AND APPLICATIONS

These pumps are designed for lifting clean or very dirty water

THEY ARE PARTICULARLY SUITED FOR HEAVY DUTY DOMESTIC AND PROFESSIONAL USE:

  • EMPTYING FLOODED BASEMENTS, GARAGES etc.
  • DRAINAGE AND OTHER INDUSTRIAL APPLICATIONS
  • DISPOSAL OF SEWAGE EFFLUENT WATER FROM SEPTIC TANKS.

These pumps are easy to install and dependable when used in fixed automatic installations.

A purpose built sump is recommended for fixed installations (minimum dimensions 500 x 500 x 500 mm) to provide total drainage and allow correct operation of the float switch. The adjustable float switch is supplied as standard on single phase models and automatically starts the pump when the fluid reaches a preset level, stopping it once the fluid has been emptied.

Installing a suitable non- return valve on the delivery pipe prevents reverse flow when the pump stops.

STRUCTURAL CHARACTERISTICS

  • Cast iron PUMP BODY, with UNI ISO 228/1 1½ inch gas threaded discharge port
  • AISI 304 stainless steel MOTOR COVER.
  • General Electric Noryl GFN2V technopolymer open IMPELLER
  • AISI 430F stainless steel MOTOR SHAFT.
  • MECHANICAL SEAL SYSTEM ceramic - graphite - NBR.
  • Sealed induction MOTOR: with double impregnated class F winding (ensuring extended motor life and wide range of use), designed for continuous duty, even with the pump partially submerged (min. 190mm). A thermal cutout device (motor protector) is incorporated in single phase models.
  • PROTECTION IP 68.
  • Neoprene “HO7 RN-F” submersible SUPPLY CABLE (10 metres standard).
  • CONSTRUCTION AND SAFETY STANDARDS in compliance with EN 60 335 -1, CEI 61-150), EN 60034-1), (IEC 34-1, CEI 2-3)
 

Peripheral Water Pumps

Self-Priming Water Pumps

Borehole Water Pumps

Multi-Stage Water Pumps

Submersible Sewage Pumps

Submersible Drainage Water Pumps