Banner
Home  //  Water Pumps Submersible Sewage  //  VXC
VXC
Print
E-mail

VXC 35-45 VXC-50 70
VXC 35-45                      VXC 50-70
vxc 35-45 pdf                  vxc 50-70 pdf
Buy Pedrollo Water Pump                  Buy Pedrollo Water Pump


DOWNLOAD PDF FOR FULL DETAILS INC PERFORMANCE CURVES AND DIMENSIONS

Flow rate up to 1200 L/min (72 m³/hr) for
Dynamic head up to 16 m

OPERATING LIMITS

Maximum operating depth 10m
Fluid temperature up to + 50 °C
Maximum passage for suspended solids Ø 40mm for VXC  8-10-15/35
Maximum passage for suspended solids Ø 50mm for VXC  8-10-15/45
Maximum passage for suspended solids Ø 50mm for VXC 15-20-30/50
Maximum passage for suspended solids Ø 70mm for VXC 15-20-30/70

Submersible high efficiency VORTEX pumps for professional use. Built using quality materials and oversized, extremely reliable and suitable for continuous heavy duty service, for dirty water, sewage, industrial waste etc

PUMP INSTALLATION AND APPLICATIONS

The vortex type impeller fitted to VXC pumps are suitable for handling dirty water, sewage, effluent water, water mixed with mud, liquids containing air or gas as well as treated and putrid mud. VXC pumps are particularly suited for installation in sewers, excavation sites, wells, channels, underground car-parks etc.

Manufactured entirely in extremely thick cast iron, these pumps are particularly sturdy, abrasion- resistant and built to last. A sump with minimum dimensions 800 x 800 x 800mm is required for fixed installations.

STRUCTURAL CHARACTERISTICS

  • Cast iron IMPELLER (304 stainless steel up to 0.75kW)
  • AISI 304 stainless steel motor shaft (430F up to 0.75kW)
  • Screws in contact with fluid in Stainless steel. (Optional stainless steel lifting eye)
  • DOUBLE SEAL SYSTEM Ceramic/silicon carbide on the pump side and lip seal on the motor side (with barrier oil chamber to lubricate and cool the sealing surfaces in the absence of water).
  • Sealed induction MOTOR: with double impregnated class F winding (ensuring extended motor life and wide range of use), designed for continuous duty, even with the pump partially submerged (min. 420mm) A thermal cutout device (motor protector) is incorporated in single phase models.
  • Three phase motors above 0.75 kW have three thermal cut-outs in the windings, connected in series with the supply cable. They must be correctly connected to the pump control panel by the user.
  • PROTECTION IP 68.
  • CONTROL BOX (single phase models only) with capacitor and manual reset, IP64
  • SUPPLY CABLE -
    Single phase : 10 metres of neoprene HO7 RN-F submersible cable
    Three phase: 10 metres of neoprene FG5 OK 4x1.5mm + 2 x 0.5mm
  • CONSTRUCTION AND SAFETY STANDARDS in compliance with EN 60 335 -1, CEI 61-150), EN 60034-1), (IEC 34-1, CEI 2-3)
 

Peripheral Water Pumps

Self-Priming Water Pumps

Borehole Water Pumps