Banner
Home  //  Water Pumps Submersible Sewage  //  VX
VX
Print
E-mail

VX
Download VX pdfBuy Pedrollo Water Pump


DOWNLOAD PDF FOR FULL DETAILS INC PERFORMANCE CURVES AND DIMENSIONS

Flow rate up to 500 L/min (30 m³/hr)
Dynamic head up to 15 m

OPERATING LIMITS

Maximum operating depth 5m below water level
Fluid temperature up to + 40 °C
Maximum passage for suspended solids Ø 50mm
For continuous duty: minimum immersion 290mm

Submersible VORTEX pumps for professional use. Built using quality materials and oversized, extremely reliable and suitable for continuous heavy duty service.

PUMP INSTALLATION AND APPLICATIONS

VX pumps are designed to lift dirty water which is not chemically aggressive to the pump components. Their construction makes them particularly suitable for DOMESTIC, CIVIL AND INDUSTRIAL applications, in all cases where suspended solids up to Ø 50mm have to be dealt with, such as water mixed with mud, groundwater and surface water.

RECOMMENDED APPLICATIONS INCLUDE DRAINING FLOODED AREAS SUCH AS BASEMENTS AND GARAGES, UNDERGROUND CAR PARKS, WASHING AREAS FOR MACHINERY, PUMPING DOMESTIC WASTE, EMPTYING CESSPITS, AND THE DISPOSAL OF SEWAGE, DIRTY AND WASTE WATER.

These pumps are easy to install and dependable when used in fixed automatic installations.

A purpose built sump is recommended for fixed installations (minimum dimensions 500 x 500 x 500 mm) to provide total drainage and allow correct operation of the float switch. The adjustable float switch is supplied as standard on single phase models and automatically starts the pump when the fluid reaches a preset level, stopping it once the fluid has been emptied.

Installing a suitable non- return valve on the delivery pipe prevents reverse flow when the pump stops.

STRUCTURAL CHARACTERISTICS

  • PUMP BODY in Cast Iron with UNI ISO 228/1 1½ or 2 inch gas threaded delivery port.
  • AISI 304 stainless steel MOTOR COVER
  • AISI 304 stainless steel BASE
  • AISI 304 stainless steel OPEN VORTEX IMPELLER (technopolymer on request).
  • AISI 403F stainless steel MOTOR SHAFT
  • DOUBLE SEAL silicon carbide/silicon carbide on the pump side and lip seal on the motor side, with a barrier oil chamber (bio-degradable) to lubricate and cool the sealing surfaces in the absence of water.
  • Sealed induction MOTOR: with double impregnated class F winding (ensuring extended motor life and wide range of use), designed for continuous duty, even with the pump partially submerged (min. 250mm). A thermal cutout device (motor protector) is incorporated in single phase models.
  • PROTECTION IP 68.
  • Neoprene "HO7 RN-F" submersible SUPPLY CABLE (10 metres standard).
  • CONSTRUCTION AND SAFETY STANDARDS in compliance with EN 60 335 -1, CEI 61-150), EN 60034-1), (IEC 34-1, CEI 2-3)
 

Peripheral Water Pumps

Self-Priming Water Pumps

Borehole Water Pumps