These stainless steel water pumps are suitable for handling clean water not containing abrasive particles, and fluids which are not chemically aggressive to the pump components.

DOWNLOAD PDF FOR FULL DETAILS INC PERFORMANCE CURVES AND DIMENSIONS

Flow rate up to 160 L/min (9.6 m³/hr)
Dynamic head up to 23m

OPERATING LIMITS

Suction lift up to 7m
Fluid temperature up to + 90°C
Maximum ambient temperature + 55°C

PUMP INSTALLATION AND APPLICATIONS

THE HYDRAULIC PERFORMANCE OF THIS STURDY AND COMPACT PUMP MAKES THEM IDEALLY SUITED FOR DOMESTIC, AGRICULTURAL OR INDUSTRIAL USES for clean water not containing abrasive particles, and fluids which are not chemically aggressive to the pump components.

These pumps should be installed in a covered area, protected against the weather.

PERFORMANCE

The AL - RED pump is designed to suit a wide range of applications, with features including:

• Anti-seize, stainless steel pump head suitable for industrial use.

STRUCTURAL CHARACTERISTICS

• Stainless Steel AISI 304 PUMP BODY, with UNI ISO 228/1 threaded suction and delivery ports
• Stainless Steel MOTOR BRACKET .
• Stainless Steel BODY
• Stainless Steel IMPELLER, with centrifugal radial flow
• EN 10088-3-1.4104 stainless steel MOTOR SHAFT

• MECHANICAL SEAL: ceramic - carbon - NBR

  MOTOR: pumps are coupled directly to an asynchronous, high efficiency PEDROLLO induction motor, which is quiet running, closed and externally ventilated, with <IM B3> structural shape, suitable for continuous duty. INSULATION class F.
  A thermal cutout device (motor protector) is incorporated in single phase motors.

Three phase motors require an adequate external motor protector complying with current standards

• PROTECTION IP 44.
• CONSTRUCTION AND SAFETY STANDARDS complies with EN60034-1, IEC 34-1, CEI 2-3
• REGISTERED MODEL

*Installations must comply to Water Bye-laws in the UK.