DOWNLOAD PDF FOR FULL DETAILS INC PERFORMANCE CURVES AND DIMENSIONS

Flow rate up to 50 L/min (3 m³/hr)
Dynamic head up to 68 m

Ready to install, stainless steel mono-block submersible pump with peripheral impellers.
Complete with - motor with built-in capacitor and thermal overload protector and 20m long power cable.

OPERATING LIMITS

Maximum fluid temperature + 40°C
Maximum immersion depth of 40m
Vertical and horizontal installation
Continuous service S1

PUMP INSTALLATION AND APPLICATIONS

These pumps are suitable for pumping clean water that does NOT contain abrasive particles and liquids that are not chemically aggressive towards the materials from which the pump is made. Suitable for domestic applications such as use in combination with small pressure sets and for irrigation, etc.

4SK pumps can be installed in wells with a diameter of no less than 4" (40m max immersion depth). The pump is lowered into the well by means of the delivery pipe until it is completely immersed. (min 50cm) and at least one metre from the bottom of the well. Care should be taken to ensure that the pump remains submerged as pump operation may cause the level of the water in the well to fall. The pump can be installed either vertically or horizontally. When installed vertically it is advisable to secure the pump by using a stainless steel or nylon cable connected to the special holes provided on the discharge head.

PERFORMANCE

Curve tolerance according to ISO 2548

STRUCTURAL CHARACTERISTICS