TOP Multi II Submersible Drainage Pump General Product Description
PERFORMANCE RANGE
Flow rate up to 80 L/min (4.8 m³/hr)
Dynamic head up to 38 m
OPERATING LIMITS
Maximum operating depth 10 m below water level
Maximum Fluid temperature + 40 °C
Maximum emptying level 22 mm from the bottom
Design, technology and innovative materials are the main features
behind the new TOP MULTI II pump, designed to be easy to use and
extremely reliable.
PUMP INSTALLATION AND APPLICATIONS
TOP MULTI pumps are suitable for pumping clean water . Their
high performance and reliability make them suitable for domestic
use.
They are suitable for providing domestic water supply from tubs,
tanks or relatively deep wells or can be used to take rain water
from tanks for irrigation systems.
STRUCTURAL CHARACTERISTICS
- DELIVERY BODY made from fibreglass reinforced techno-polymer,
particularly resistant to mechanical stress, knocks and corrosion,
fitted with UNI ISO 228/1 1¼ inch gas threaded vertical
delivery port.
- SUCTION STRAINER made from fibreglass-reinforced techno-polymer,
providing the support base for the pump.
- Techno-polymer HOSE CONNECTION with screw fitting
- Techno-polymer IMPELLER
- Techno-polymer DIFFUSERS
- EXTERNAL FLOAT SWITCH for automatic pump operation.
- AISI 416 stainless steel MOTOR SHAFT
- DOUBLE SEAL SYSTEM carbon / alumina mechanical seal on
the pump side, and lip seal on the motor side. A barrier oil chamber
of bio-degradable oil lubricates and cools the sealing surfaces
in the absence of water.
- Sealed induction MOTOR suitable for continuous duty with
built-in thermal cutout device (motor protector). INSULATION class
F (provides the motor with a considerable overload tolerance and
substantially increases the service life of the motor itself).
Motor cooling is assured by the pumped liquid.
- PROTECTION IP 68.
- UK pumps supplied with 10 metres of cable. Other alternatives
on request.
- CONSTRUCTION AND SAFETY STANDARDS in compliance with
EN 60 335-1 (IEC 335-1, CEI 61-150) EN 60034-1 (IEC 34-1, CEI
2-3).
- INCLUDES - 1¼ inch female/female thread coupling
with check valve.
PERFORMANCE DATA
PRODUCT DIMENSIONS
|
