Online Catalogue

View Cart | Checkout | Items:, Value:

Pump Controllers and Switches

Online Catalogue |  Pump Controllers and Switches

Inverters

Variable Speed Inverter Pump Controllers for constant pressure and greater efficiency.

Click on image for more info and prices.

Presflo Pump Controller Presflo Pump Controller Ref: Presflo
Previously known as Easypress (see below) now called Presflo

Pressure activated pump controller for fully automatic operation of water supply pumps. Includes dry run protection. Maximum load 10 amps. Suitable for water up to 65° celcius.

Can be used in conjunction with Aquapower and Superpro pumps.

- Dry running protection with automatic re-set.
- Excessively frequent starting protection.
- Built in check valve.
- Cut-off flow rate as low as : 2.5 lt/min
- Resin bonded electronic board.
- Nominal max current 10A & 16A (1HP & 2HP).
- Built-in water accumulator to avoid frequent pump start/stop in case of leakage in the system.
Different models with different pre set pump start pressure.
Voltage : available in 230V (or 110V only on special order)
Connections : available in BSP


Technical details pdf
Price: £120.00 (Excluding VAT at 20%)

Quantity:  

Easypress Pump Controller New DesignEasypress Pump Controller New Design Ref: Easypress

Easypress is now called Presflo. Previous Easypress models can be replaced with Presflo - see above.

Technical details pdf

Presflo Multi Basic Pump Controller Presflo Multi Basic Pump Controller Ref: Presflo Multi Basic
1ph/1ph

Pressure activated pump controller for fully automatic operation of water supply pumps. Includes dry run protection. Maximum load 10 amps. Suitable for water up to 65° celcius.

Can be used in conjunction with Aquapower and Superpro pumps.

PRESFLO MULTI BASIC - Electronic pressure-flow sensing pump controller equipped with 3 litre surge tank
- Mechanically selectable pump start pressure:
1-4 bars.
- 3 litre surge tank.
- Dry running protection with automatic re-set.
- Excessively frequent starting protection.
- Built in check valve.
- Cut-off flow rate as low as: 2.5 lt/min.
- Resin bonded electronic.
- Nominal max current 10A (1HP).
Voltage : available in 230V (or 110V only on special order)
Connections : available in BSP


Technical details pdf
Price: £210.00 (Excluding VAT at 20%)

Quantity:  

Presflo Multi Pump Controller Presflo Multi Pump Controller Ref: Presflo Multi
1ph/1ph

Pressure activated pump controller for fully automatic operation of water supply pumps. Includes dry run protection. Maximum load 10 amps. Suitable for water up to 65° celcius.

Can be used in conjunction with Aquapower and Superpro pumps.

PRESFLO MULTI - Electronic pressure-flow sensing pump controller equipped with 3 litre surge tank
- Digitally selectable pump start pressure: 1-5 bars.
- 3 litre surge tank.
- Dry running protection with automatic re-set.
- Digital display.
- Excessively frequent starting protection.
- Built in check valve
- Cut-off flow rate as low as : 2.5 lt/min
- Resin bonded electronic
- Nominal max current 10A & 16A (1HP & 2HP).

Voltage : available in 230V (or 110V only on special order)
Connections : available in BSP
Display : Bar or PSI


Technical details pdf
Price: £220.00 (Excluding VAT at 20%)

Quantity:  

Presflo Multi Cosfi Pump Controller Presflo Multi Cosfi Pump Controller Ref: Presflo Multi Cosfi
1ph/1ph

For Borehole Pumps

Pressure activated pump controller for fully automatic operation of water supply pumps. Includes dry run protection. Maximum load 10 amps. Suitable for water up to 65° celcius.

Can be used in conjunction with Aquapower and Superpro pumps.

PRESFLO MULTI COSFI - Electronic pressure-flow sensing pump controller, with 3 litre tank and Power Factor monitor & alarm
The ideal solution for submersible borehole pumps.

Same features as Presflo Multi with additional monitoring of the pump motor power factor, with ability to stop pump in the event of dramatic changes of power factor values.

Voltage : available in 230V (or 110V only on special order)
Connections : available in BSP
Display : Bar or PSI


Technical details pdf
Price: £276.00 (Excluding VAT at 20%)

Quantity:  

PRESET Pump ControllerPRESET Pump Controller Ref: PRESET

Electronic Pressure Regulator

Technical Details
Price: £184.00 (Excluding VAT at 20%)

Quantity:  

Brio Pressure Sensing Pump ControllerBrio Pressure Sensing Pump Controller Ref: BRIO/2000M
Fully automatic pump controller suitable for all water supply applications including negative head.

The Brio 2000MT features:
  • Adjustable start pressure
  • Pump protection from dry running
  • Pressure guage

    • Suitable for showers and other hot water applications (max 65°c) fitted with Aquapower and Superpro pumps

    Dimensions
    Length = 195mm to end of thread
    Depth = 110mm
    Width = 110mm

    If you are using a 110v pump please select the Brio 2000M version

    Technical details pdf
    Price: £111.00 (Excluding VAT at 20%)


    Brio Model Choice

    Choose Brio Model


    Quantity:  

    Guardian M Evo Borehole Pump ControllerGuardian M Evo Borehole Pump Controller Ref: Guardian M

    Borehole pump controller for single phase motors 230v - 50 Hz from 0.5Hp up to 3Hp (0.37 - 2.2 kW).

    Application range 1 Amp - 18 Amp


    Technical Details
    Price: £295.00 (Excluding VAT at 20%)

    Quantity:  

    Guardian 1 Borehole Pump ControllerGuardian 1 Borehole Pump Controller Ref: Guardian 1E

    Borehole pump controller for three phase motors 400V - 50Hz from 0.5Hp to 3Hp (0.37 - 2.2 kW).

    Application range 1 Amp - 9 Amp


    Technical Details
    Price: £335.00 (Excluding VAT at 20%)

    Quantity:  

    Guardian 2 Borehole Pump ControllerGuardian 2 Borehole Pump Controller Ref: Guardian 2

    Borehole pump controller for three phase motors 400V - 50Hz from 3 to 7.5 kW.

    Application range 9 Amp - 18 Amp


    Techmical Details
    Price: £420.00 (Excluding VAT at 20%)


    Choose Motor Size



    Quantity:  

    LogicflowLogicflow Ref: LF150

    A flow sensing switch which activates a pump when water starts to flow under gravity. Suitable for cold or hot water (max 60 celcius), maximum switch load 8 amps. Applications include shower systems (single or twin pump) or machine water supplies.


    Technical Details
    Price: £80.00 (Excluding VAT at 20%)

    Quantity:  

    Pressure switch (Square D) Pressure switch (Square D) Ref: P/AC-F




    Model


    Quantity:  

    Italtecnica pressure switchItaltecnica pressure switch Ref: PM5

    Single phase 1.4 ÷ 5 bar

    Price: £24.75 (Excluding VAT at 20%)

    Quantity:  

    PM12 Pressure SwitchPM12 Pressure Switch Ref: PM12
    Italtecnica Pressure Switch

    Operating Range 3 - 12 Bar

    Price: £31.00 (Excluding VAT at 20%)

    Quantity:  

    Online Catalogue |  Pump Controllers and Switches

    spacer
    spacer