*
Pedrollo Distribution Ltd.
9 Cavendish
Lichfield Road Industrial Estate
Tamworth B79 7XH
Tel: 01827 313000 Fax: 01827 313008
*
*
Pedrollo.co.uk home pagePeripheral PumpsCentrifugal PumpsMulti-Stage PumpsStainless-Steel PumpsSelf-Priming PumpsSubmersible PumpsBorehole PumpsBronzeHydrofreshAccessoriesCombipress
*

PLURIJET Self Priming Multi Impeller Pump Range General Product Description

Further Product Info

Link to Pedrollo Plurijet Self Priming Pump Curve

PLURIJET Performance Curve
PLURIJET Pump Performance Data
PLURIJET Pump Dimensions
Get the bigger picture
Download PDF file

PERFORMANCE RANGE

Flow rate up to 200 L/min (12.0 m³/hr)
Dynamic head up to 120m

OPERATING LIMITS

Suction lift up to 9m
Fluid temperature up to + 40°C
Maximum ambient temperature + 40°C

PUMP INSTALLATION AND APPLICATIONS

These pumps are suitable for handling clean water and fluids which are not chemically aggressive to the pump components, even when air is mixed with the liquid.

THEY ARE EXTREMELY RELIABLE, ECONOMICAL AND SIMPLE TO USE, BEING PARTICULARLY SUITABLE FOR DOMESTIC APPLICATIONS SUCH AS THE AUTOMATIC DISTRIBUTION OF WATER FROM SMALL AND MEDIUM-SIZED SURGE TANKS, WATERING GARDENS, ETC.

These pumps should be installed in a covered area, protected against the weather.

PERFORMANCE

The wide range of pumps in the Plurijet series suit a variety of applications.

  • high heads with respect to power requirements;
  • flat operating and power absorption curves, giving moderate curve variations with respect to large variations in delivery demand;
  • high tolerance of the presence of entrained air in the pumped liquid;
  • suction capacities up to 9 meters.

Curve tolerance according to ISO 2548.

STRUCTURAL CHARACTERISTICS

  • Cast iron and stainless steel AISI 304 PUMP BODY (cast iron up tp 0.75kW) with UNI ISO 228/1 gas threaded suction and delivery ports.
  • Technopolymer IMPELLERS (approved for drinking water).
  • AEN 10088-3-1.4104stainless steel MOTOR SHAFT
  • Ceramic and graphite MECHANICAL SEAL.
  • MOTOR: the pumps are coupled directly to an asynchronous, high efficiency PEDROLLO induction motor of suitable size which is quiet running, closed and externally ventilated, suitable for continuous duty. INSULATION class F
    A thermal cutout device (motor protector) is incorporated in single phase motors.

Three phase motors require an adequate external motor protector connected according to current standards.

  • PROTECTION IP 44.
  • REGISTERED MODEL.

NOTE: It is always advisable to install a foot valve on installations that involve a suction lift.

PERFORMANCE CURVE

Pedrollo Plurijet Self Priming Pump Curve

Pedrollo Plurijet Self Priming Pump Curve 1

Pedrollo Plurijet Self Priming Pump Curve 2

PERFORMANCE DATA

Performance Data Pedrollo Plurijet 80/90 Self Priming Pump
Performance Data for Pedrollo Plurijet Self Priming 100/130  Pump
Performance Data for Pedrollo Plurijet  200 Self Priming Pump

PRODUCT DIMENSIONS

Dimensions of Pedrollo Plurijet 80/90 Self Priming Pump
Dimensions of Pedrollo Plurijet 100/130 Self Priming Pump
Dimensions of Pedrollo Plurijet 200 Self Priming Pump

*
Footer Logo Pedrollo Water Pumps
*