MC10I Submersible Sewage Pump Range (with single vane impeller) General Product Description

Further Product Info MC10I Pump Performance Curve MC10I Pump Performance Data MC10I Pump Dimensions Download PDF file

PERFORMANCE RANGE

Flow rate up to 800 L/min (48 m³/hr)
Dynamic head up to 15 m

OPERATING LIMITS

Maximum operating depth 5m below water level
Fluid temperature up to + 40 °C
Maximum passage for suspended solids Ø 50mm

Submersible VORTEX pumps for professional use. Built using quality materials and oversized, extremely reliable and suitable for continuous heavy duty service.

PUMP INSTALLATION AND APPLICATIONS

The MC10 submersible pump is designed to handle dirty water and sewage in domestic and civil applications. It is fitted with a STAINLESS STEEL SINGLE VANE impeller and is suitable for pumping liquids with suspended solids, including short fibres.

IT IS PARTICULARLY RECOMMENDED FOR THE TRANSFER OF DOMESTIC SLUDGE, EFFLUENT AND SURFACE WATER, AND WATER MIXED WITH MUD IN AREAS SUCH AS: DOMESTIC HOUSING, INDUSTRIAL APPLICATIONS AND UNDERGROUND CAR PARKS.

These pumps are easy to install and dependable when used in fixed automatic installations.

A purpose built sump is recommended for fixed installations (minimum dimensions 500 x 500 x 500 mm) to provide total drainage and allow correct operation of the float switch. The adjustable float switch is supplied as standard on single phase models and automatically starts the pump when the fluid reaches a preset level, stopping it once the fluid has been emptied.

Installing a suitable non- return valve on the delivery pipe prevents reverse flow when the pump stops.

STRUCTURAL CHARACTERISTICS

• Stainless Steel AISI 304 PUMP BODY with UNI ISO 228/1 2" gas threaded delivery ports.
• AISI 304 stainless steel MOTOR COVER.
• AISI 304 stainless steel BASE
• AISI 304 stainless steel SINGLE VANE IMPELLER
• AISI 316 stainless steel MOTOR SHAFT
• DOUBLE SEAL silicon carbide/silicon carbide on the pump side and lip seal on the motor side, with a barrier oil chamber (bio-degradable) to lubricate and cool the sealing surfaces in the absence of water.
• Sealed induction MOTOR: with double impregnated class F winding (ensuring extended motor life and wide range of use), designed for continuous duty, even with the pump partially submerged (minimum 250mm). A thermal cutout device (motor protector) is incorporated in single phase models.
• PROTECTION IP 68.
• Neoprene "HO7 RN-F" submersible SUPPLY CABLE supplied standard with 10 metre cable.
• CONSTRUCTION AND SAFETY STANDARDS in compliance with EN 60 335 -1, CEI 61-150), EN 60034-1), (IEC 34-1, CEI 2-3)

PERFORMANCE CURVE

PERFORMANCE DATA

PRODUCT DIMENSIONS