RX Submersible Drainage Pump Range General Product Description

Further Product Info RX Pump Performance Curve RX Pump Performance Data RX Pump Dimensions Get the bigger picture Download PDF file

PERFORMANCE RANGE

Flow rate up to 300 L/min (18 m³/hr)
Dynamic head up to 23 m

OPERATING LIMITS

Maximum operating depth 10m below water level
Fluid maximum temperature 50°C
(+ 90 °C for a maximum period of 3 minutes)
Maximum passage for suspended solids Ø 10mm
Maximum emptying level 14mm from the bottom for RX 1-2
Maximum emptying level 30mm from the bottom for RX 3-4-5

Innovative design and advanced technology are incorporated into these new pumps, designed to be easy to use and extremely reliable.

PUMP INSTALLATION AND APPLICATIONS

RX pumps are suitable for lifting clear water not containing abrasive substances. They have been designed for easy use and are extremely reliable even when subjected to continuous use (subject to correct installation). The motor is fully cooled and has an ample reserve of power plus a double seal system with barrier chamber of bio-degradable oil. The motor and the pump are easily removed, making maintenance and repair simple.

These pumps are particularly suitable for draining flooded areas (basements, garages etc.) emptying swimming pools, tanks and aquariums, waste household water disposal (dishwashers, washing machines), supplying garden fountains, small scale irrigation for gardens in general from collection tanks and emptying sump pits.

PERFORMANCE

When designing performance levels for RX pumps, special attention was given to typical requirements for domestic usage.

• performance curves specially designed for high delivery rates at the low installed power rating

Curve tolerance according to EN ISO 9906 APP A.

STRUCTURAL CHARACTERISTICS

• DELIVERY BODY made from AISI 304 stainless steel, fitted with UNI ISO 228/1 1½ inch or 1¼ inch gas
  threaded vertical delivery port.
• SUCTION STRAINER made from AISI 304 stainless steel, providing the support base for the pump
• AISI 304 stainless steel IMPELLER
• EXTERNAL FLOAT SWITCH for automatic pump operation.
• AISI 304 stainless steel MOTOR SUPPORT
• EN 10088-3-1.4104 stainless steel MOTOR SHAFT
• DOUBLE SEAL SYSTEM carbon / ceramic (or optional silicon carbide hard faced) mechanical seal on the pump side, and lip seal on the motor side. A barrier oil chamber of biodegradable oil lubricates and cools the sealing surfaces in the absence of water.
• Sealed induction MOTOR suitable for continuous duty with built-in thermal cutout device (motor protector). INSULATION class F (provides the motor with a considerable overload tolerance and substantially increases the service life of the motor itself). The motor is cooled by the pumped liquid.
• PROTECTION IP 68.
• UK pumps supplied with 10 metres of cable. Other alternatives on request.
• CONSTRUCTION AND SAFETY STANDARDS in compliance with EN 60 335-1 (IEC 335-1, CEI 61-150)
  EN 60034-1 (IEC 34-1, CEI 2-3).

PERFORMANCE CURVE

PERFORMANCE DATA

PRODUCT DIMENSIONS