Banner
Home  //  NK
NK2 - NK4
Print
E-mail

NK
Download CP pdf
Buy Pedrollo Water Pump


DOWNLOAD PDF FOR FULL DETAILS INC PERFORMANCE CURVES AND DIMENSIONS

  • Flow rate up to 120 l/min (7,2 m³/h)
  • Head up to 92 m

OPERATING LIMITS

Fluid maximum temperature up to + 40 °C
Maximum sand content: 50g/m3
Maximum operating depth 20m below water level

The NK is a range of multi-stage submersible pumps, carefully engineered to give you the best
in performance, reliability, durability and ease of maintenance.

PUMP INSTALLATION AND APPLICATIONS

These pumps are suitable for pumping clean water or fluids with a sand content of no more than 50g/m3. Their high performance and dependability make them suitable for use in domestic, civil and industrial fields: for the automatic supply of water; for emptying tanks, sump pits, swimming pools and aquariums; for irrigating gardens; for washing and pressure boosting systems; and for fire-fighting purposes etc.

NK pumps can be installed in wells with a diameter not less than 6 inches (152mm). The pump can be installed either vertically or horizontally; when installed vertically, it is advisable to secure the pump by using a stainless steel or nylon cable connected to the special eyebolt provided on the discharge head.

STRUCTURAL CHARACTERISTICS

  • AISI 304 Stainless steel EXTERNAL CASING with 1¼ inch gas thread delivery opening UNI ISO 228/1
  • Noryl GFN2V technopolymer IMPELLERS
  • Noryl GFN2V technopolymer DIFFUSERS
  • DIAPHRAGM in stainless steel AISI 304 complete with wear rings.
  • AISI 430F stainless steel MOTOR SHAFT (AISI 416 up to 0.75kw)
  • MOTOR BRACKETS in pressed brass.
  • DOUBLE SEAL SYSTEM silicon carbide/silicon carbide mechanical seal on the pump side, and carbon/ceramic on the motor side (with barrier oil chamber to lubricate and cool the sealing surfaces in the absence of water).
  • AISI 304 stainless steel SCREWS
  • AISI 304 stainless steel FILTER
  • MOTOR suitable for continuous duty. A thermal cutout device (motor protector) is incorporated in single phase motors.
    Motor cooling is assured by the liquid in which the pump is immersed.
  • INSULATION class F (provides the motor with a considerable overload tolerance and substantially
    increases the service life of the motor itself).
  • PROTECTION IP 68.
  • 20 meters "HO7 RN-F" submersible POWER CABLE with removable connector.
  • CONSTRUCTION AND SAFETY STANDARDS in compliance with EN 60 335-1 (IEC 335-1, CEI 61-150) EN 60034-1 (IEC 34-1, CEI 2-3).
  • EXTERNAL FLOAT SWITCH optional extra for single phase motors.