Banner
Home  //  6SR
6SR
Print
E-mail

Pedrollo 6SR Borehole Pump
Download 6SR pdfBuy Pedrollo Water Pump


DOWNLOAD PDF FOR FULL DETAILS INC PERFORMANCE CURVES AND DIMENSIONS

Flow rate up to 330 L/min (19.8 m³/hr)
Dynamic head up to 390 m

This new series of submersible pumps is fitted with a patented anti-seize system (ensuring pump operation, even after being left idle for long periods),and a water filled motor with removeable cable connector.

OPERATING LIMITS

Maximum fluid temperature + 35°C
Maximum sand content: 100g/m3
Maximum Depth 100m
Starts: max. 20/hr

PEDROLLO borehole pumps feature a patented design giving them a high tolerance of entrained sand.

PUMP INSTALLATION AND APPLICATIONS

These pumps are suitable for pumping water with a sand content of up to 100g/m3. Their high performance and dependability make them suitable for use in civil, agricultural and industrial fields, for the automatic distribution of water, for irrigation, washing and pressure-boosting systems, and for fire-fighting purposes etc.

6SR pumps can be installed in wells with a diameter of no less than 6" (100m max immersion depth). The pump is lowered into the well by means of the delivery pipe until it is completely immersed. (min 50cm) and at least one metre from the bottom of the well. Care should be taken to ensure that the pump remains submerged as pump operation may cause the level of the water in the well to fall. The pump can be installed either vertically or horizontally. When installed vertically it is advisable to secure the pump by using a stainless steel or nylon cable connected to the special holes provided on the discharge head.

PERFORMANCE

6SR pumps combine the advantages of a submersible pump with the performance of a centrifugal pump.
As submersible pumps, they assure reliable operation even with considerable water depth.
As multistage pumps they assure high flows, high heads, stable performance curves.

Curve tolerance according to ISO 2548

STRUCTURAL CHARACTERISTICS

  • UNI ISO 228/1 gas thread DISCHARGE HEAD in brass (up to 2.2kW discharge head, check valve and motor bracket in AISI 304 stainless steel).
  • Techno-polymer, high resistance CHECK VALVE enables the weight of the column of water to be dispersed without stress to the impellers and diffusers, thus ensuring long pump life.
  • Lexan General Electric technopolymer IMPELLERS.
  • Noryl GFN2v technopolymer DIFFUSERS
  • AISI 304 stainless steel BOWL.
  • AISI 304 stainless steel EXTERNAL SLEEVE.
  • AISI 304 stainless steel PUMP SHAFT
  • Brass MOTOR BRACKET built to NEMA dimensional standards.
  • AISI 316L sintered stainless steel TRANSMISSION COUPLING
  • AISI 304 stainless steel BOLTS
  • AISI 304 stainless steel FILTER
  • AISI 304 stainless steel CABLE GUARD
  • 6" SUBMERSIBLE MOTORS: water filled motor with removeable cable connector.
  • PROTECTION IP 68 for Pedrollo motor
  • FE4DM/T submersible SUPPLY CABLE. Supplied standard with 1.5m of cable (4" motors).4m of cable (6"motors)
  • CONSTRUCTION AND SAFETY STANDARDS in compliance with  EN 60034-1 (IEC 34-1, CEI 2-3).